It's an DAF XF105 with the heaviest engine, the 510 hp version. Furthermore it's equiped with planetary rear axles and the large SuperSpaceCab.

Here they have equiped it with the flatbed, but this can be taken of. Underneath is a fifth wheel, so that it can pull trailers.

The rear of the chassis holds a coupling, so that it can also be used with a drawbar trailer. Between the axles there is room for the disel- and Ad-Blue tank. A sliding chain box is mounted between the tandem axles.

The big Effer 1355 was installed behind the cab. It's the 8S version that extends 8x hydraulically. This gives the crane an outreach of 19,65 meters where it can lift 4,08 tons. Between the crane and the cab they installed a rack that carries some air barrels. Between it, they installed the oil tank and some coolers.

The whole chassis is nicely covered with steel plate. On this side the free space is filled with toolboxes.

This Effer 1355 has got the CrosStab system. This means that this side has got a swiveling outrigger. In transport position it is folded beside the crane, as can be seen here.

InduMove mainly does industrial moves and machinery installation jobs. The large cab is necessary, as this work takes place throughout Europe.

Here the crane is set up and this leg has jet swiveled out. Here it is in the maximum position, pointing forwards.

The outriggers at the rear are also down now. The outrigger at the right front is mounted to the crane base and extends to the right front. This gives a K-shaped outrigger base that also offers lifting capacity to the front. This is about 90% of the lifting capacity, probably more with some ballast at the flatbed.

De crane is unfolding here. The crane has gotten the same color as the truck, giving a nice overall image.

Here we can see that the swiveling leg extends beyond the front of the truck and this way provides capacity to the front. When there isn't enough room, the leg can also be placed in a different position.

The base crane is extending. On the 8S crane they mounted a 4S heavy duty jib. This offers a total outreach of 28,54 meters with 1680 kg capacity. The heavy duty jibs are particulary good when used closer to the crane, as they where built for heavier loads. This jib will lift a maximum of 6,2 tons at about 12 meter distance and 16 meters of height.

The empty weight is about 29 tons, which makes this truck usable everywhere in Europe.

And here it gets folded down again. A nice truck for the heavy machinery work!