At Fassi stood this Fassi 800BXP.24 that is mounted on a MAN TGA 35.480 8x2 of Grechi A. & Figli. The crane extends 4x hydraulically, the jib extends another 6x hydraulically.
Behind it stood this interesting Scania R560 8x2*6 with demountable Fassi 1300 of Serapide Trans. The unit is built by Sol Gru Martelli, that has also mounted the crane. The crane is a 1300AXP.24, this means 4x hydraulically extending. Remarkable is that the rear outriggers are mounted to the truck chassis, this means that the body has to transfers the load of the crane through the connection onto these outriggers. At the drivers-side there is a power unit with which the crane can be driven.
Pris-Mag
Pris-Mag showed several types of bodies, all on demountable frames. The cranes are an Effer 585 with a flatber and a Palfinger PK800 TK. The Effer was mounted on a DAF 85 CF 8x2, the Palfinger stood on an Iveco Trakker 440 in 8x4 layout. The Palfinger is demounted completely with ballast and outriggers. With it’s own engine it can used independantly of the truck.
Cormach
Cormach showed this building material crane, a unit from the so called Tech-Series. This is an 87000 Tech. The crane has an outreach of 28 meter and will still lift 730 kg there. It is equiped with extendable ballast and is mounted onto a Volvo FM13 8x4. The crane goes to a customer in Belgium that already owns several of these units. The cab can be raised several meters.
Volvo
At Volvo stood this Volvo FH520 6x4 tractor and this FH16-580 8x4 truck.
Pavelli
The trailer manufacturer Pavelli showed this nice 4-axled drawbar trailer for transport of machinery.
Faymonville
Last is the stand of Faymonville. Here stood a 5-axled ballasttrailer and very low 2-axled semi lowloader for TransBosio. In the rear, between the wheels of the first axle, they mounted a small winch.
