 |
 |
 |
 |
 |
 |
 |
The stand of Cornut had this nice Volvo FMX 500 8x4*4 on displax. The Volvo is equiped with a rear mounted Cormach 87000 E6F crane, a 6x extending unit that can lift 4,51 tonnes at 14,1 meters. The jib of the crane lies on the front of the loading box, it's a 6x extending E6F186 that gives a total outreach of 26,27 meters. The Volvo has full air suspension and has been build very low.
|
 |
| At the flatbed of the Volvo this new Cormach 45000-E6 ASC crane was displayed. |
 |
 |
 |
 |
 |
 |
 |
The company Appydro displayed this Scania R560 8x4 of Saphore Levage. It is equiped with an Effer 850 in 6S version, a crane with an outreach of 15,88 meters. Remarkable is the combination of that crane with a hooklift installation. It's a Donguy sa unit, this company also installed the Effer crane.
|
 |
 |
 |
Beside it stood this woodtrailer with woodcrane, a development of Appydro. The 3-axled trailer is equiped with a 45 t/m woodcrane that is installed at the front, a APP JMP 45. This crane is driven by a Deutz diesel engine that is installed underneath the chassis.
|
 |
 |
 |
Fassi didn't show any large cranes, but had this newly developed F165Z on display, a Z-crane. With this Fassi is also entering the market for wood- and recycling cranes. This model has 8 meters outreach and 15 t/m capacity.
|
 |
At the stand of Hyvy this Kennis 14R crane was displayed. It's a 14 t/m model that has got it's own engine. It is meant to be installed on a trailer over which it is able to drive, like one for transporting bricks.
|
 |
GBInt (Behm group) is the new name for the trailers of ACTM and Kaiser. Here they showed a 3-axled semi lowloader and a 3-axled middle axled drawbar trailer.
|
 |
| Trouillet showed a 3-axled semi lowloader, it's loaded with a 20-foot container chassis.. |
 |
 |
Louault showed this 4-axled semi lowloader, it is equiped with a floor that can widened hydraulically. The ramps also shift there position.
|
 |
Fliegl showed a 3-axled semi lowloader with a containerchassis on top.
|
 |
| Nooteboom showed their new 3-axled semi-lowloader for the transport of construction equipment. |
 |
 |
| AMC Castera showed this 3-axled semi-lowloader, they also can change the width of the floor hydraulically. On top is a 3-axled middle axle drawbar trailer. |
 |
| Outside stood this Trax trailer with tiltable ramps. |
 |
 |
An interesting product is installed on this Volvo FMX 8x4*4. The CIF tipper has got a Fliptop roof. The rear holds a Theam M25E spiral conveyor for asfalt. With this unit it is easier to carry asfalt to small places like pavements. The unit is remotre controlled. With that control you can also operate the truck, it is driven and steered by a hydraulic drive. This makes it possible to operate the whole unit with 1 person.
|
 |
Last of the show is this interesting Mercedes Axor 1833 4x4 with a Arvel snow plow and salt spreader.
|
| |
|
